Xtool Upgrade Tool V2.0.57 [extra Quality] [OFFICIAL]

: On your scanner, navigate to About to find your Serial Number (username) and Password.

Laser engraving requires absolute precision. To achieve this, software stability is just as important as hardware quality. The release of the marks a significant step forward in firmware management for xTool machines. Whether you operate an xTool D1 Pro, M1, P2, or the latest F1 Ultra, keeping your firmware updated ensures your hardware runs safely and efficiently.

Download the official executable ( .exe for Windows or .dmg for Mac) via the official xTool Support Center or authorized developer links.

Switch the machine back on. Ensure no other programs (like XCS or LightBurn) are running in the background. Step 3: Run the Upgrade Tool Open the xTool Upgrade Tool v2.0.57 application. xtool upgrade tool v2.0.57

The original xTool USB cable (avoid using unpowered USB hubs).

Always clear the laser bed and ensure the laser head moves freely before initiating any update sequence.

Revives "bricked" machines that refuse to connect to XCS. : On your scanner, navigate to About to

⭐⭐⭐⭐ (4/5)

Temporarily disable your antivirus software. Restart the upgrade tool as an Administrator (Windows) and try again. Machine Unresponsive After Update (Bricked State) Cause: Power interruption during the flash process.

Power on the device. Scroll to the "About" section on the device screen. Write down your Serial Number (Username) and Password . You will need these to log into the software. After writing them down, turn off the device, remove the SD card, and insert it into your computer using a USB card reader. This allows the Upgrade Tool to write directly to the card. The release of the marks a significant step

Ensure you are using the dedicated v2.0.57 version; older versions or tools for other models (like TP150/TP200) often cause authentication errors.

Note down your (username) and Password ; you will need these for the upgrade interface. The SD Card Method : Power down the device and remove the TF (SD) card .