V Guard Du 1000 Smart User Manual Official

Illuminates when grid power fails and the inverter is supplying power from the battery.

V‑Guard offers a on the DU 1000 Smart inverter (terms apply). The warranty covers manufacturing defects and component failures under normal use. It does not cover :

To register your product for warranty, you can visit the V‑Guard website or call the customer care number.

For A/C units, keep the stabilizer powered but appliance OFF for 3 minutes after power restoration to allow gas pressure equalization. v guard du 1000 smart user manual

Connect the from the back of the inverter to the negative (-) terminal of the battery. Note: A small spark may occur when connecting the second cable; this is normal.

V-Guard typically offers a on the electronics (PCB, sensors) for its inverters, with coverage extending up to 7 years for specific components like motor windings (if applicable). However, standard domestic product warranties usually last 1 to 2 years on the unit.

: Enable faster charging for emergency situations through the app. Illuminates when grid power fails and the inverter

Provide step-by-step instructions for installation, including safety precautions.

: Turn off high-drain appliances (like irons, mixers, or lasers). Turn the inverter switch OFF and then ON again to reset.

Plug the UPS input cord into a 3-pin wall socket with proper grounding (earthing). It does not cover : To register your

The is a 1000 VA "Digital UPS" (DUPS) designed for modern homes. It combines a pure sine wave inverter with IoT (Internet of Things) connectivity, allowing you to monitor and control it using your smartphone. It is part of V-Guard’s smart inverter series, known for features like Appliance Mode, Turbo Charging, and Bluetooth/Wi-Fi connectivity. It delivers clean, stable power to protect sensitive electronics while giving you remote control over your home’s backup power.

Disclaimer: This document is an illustrative user manual created for informational purposes. Actual V-Guard product features may vary. Always refer to the original manual supplied with your product.

Switch on the mains wall outlet first, then press the front power button on the UPS. 4. Operating Modes Explained