Ts1162 Installation Manual

: If the TS1162 is the last device on the LAN run, set DIP switch 8 to the "ON" position for proper termination. aritech.com.au 4. Wiring and Connectivity Challenger LAN : Connect to the RS-485 LAN terminals (D+, D-, +12V, 0V). Inputs/Outputs Request to Exit (RTE)

The manual includes standard safety warnings regarding the airbag (located in the A-pillar) and the handling of glass. These are prominent and necessary, earning the manual points for safety consciousness.

: Displays the current state of the printer (Ready, Error, Media Out). ts1162 installation manual

With the hardware installed, you'll need to configure the keypad within the Challenger system.

ChallengerPlus Installation and Quick Programming Manual - Aritech : If the TS1162 is the last device

: Position the mounting template or the unit itself against the wall and mark the screw hole locations.

Once programming is complete, perform these tests to ensure correct operation: Inputs/Outputs Request to Exit (RTE) The manual includes

Open the ribbon mechanism chassis by lifting the green ribbon access lever.