Tgc Bc-90-1h Manual Review

Most TGC hobs use a D-size battery for the ignition system. Locate the battery box underneath the unit and ensure the polarity is correct. 4. Operating Instructions

If the heater is left in standby for more than 10 minutes, priority is often released, and high temperatures (above 50°C) may reset to a safer 48°C for the next user.

Proper installation is critical for the extraction efficiency and safety of your TGC BC-90-1h. Always isolate the main power supply before beginning installation. Safety Clearances tgc bc-90-1h manual

When the hot water is in use, the priority cannot be transferred.

Always turn off the gas rings or induction zones before removing pots; empty hot pans left under a running hood can cause a flash fire. Never flambé food directly underneath the TGC BC-90-1h. Most TGC hobs use a D-size battery for the ignition system

Use the arrow keys to adjust between a low setting of up to a maximum safety threshold of 48°C for typical use.

(e.g., code "11" for ignition failure) if the system malfunctions. Operation Indicator : Features a dual-color LED that remains during standby and turns when the heater is actively in use. On/Off Control Operating Instructions If the heater is left in

Safety Auto-Reset : If a user sets the temperature to a high-heat level (50°C or 60°C) and the priority times out, the system automatically drops the heat target back down to to prevent accidental scalding. Troubleshooting Common Error Codes When your water heater suffers an interruption, the screen flashes a digital code. Error Code Primary Root Cause Immediate Action Step Code 11 Ignition Failure (Burner fails to spark or stay lit)