Sscom 3.2 [new] < TRUSTED ◉ >

The software interfaces with the Windows OS via standard serial port drivers (usually serial.sys or USB-to-Serial drivers such as FTDI, CH340, or CP210x). It abstracts the Windows API calls for CreateFile , ReadFile , and WriteFile into a graphical user interface (GUI), allowing users to configure Baud Rate, Data Bits, Stop Bits, and Parity without command-line inputs.

SSCOM 3.2 is a classic windows-based Serial Port Communication Utility. It acts as a terminal program that allows users to send and receive data via serial interfaces. Whether you are working with older RS-232 ports or modern USB-to-UART bridges, SSCOM bridges the gap between your computer and external microcontroller units (MCUs), sensors, or industrial equipment.

When an embedded system crashes, the last output is often a stack trace or error code. SSCOM’s "Always on Top" feature and high buffer capacity ensure that the final moments of communication are captured before the device resets. sscom 3.2

Often, devices respond to raw binary commands, not ASCII.

I can provide tailored instructions or troubleshooting steps based on your setup! Share public link The software interfaces with the Windows OS via

可实时查看串口的 CTS、DSR、RLSL（CD）等硬件信号线的状态，并可手动控制 DTR、RTS 信号线的输出。

：右键点击 sscom.exe ，选择“以管理员身份运行”。 It acts as a terminal program that allows

When writing firmware for platforms like Arduino, STM32, ESP8266, or PIC, developers use SSCOM to read printf or Serial.print debug logs to monitor variable states and code execution paths.

If SSCOM 3.2 shows an empty COM port list, check your Windows Device Manager to ensure your USB-to-Serial drivers (CH340, FTDI, etc.) are correctly installed.