Sc673-10 Ricoh Error Jun 2026
The error code typically indicates a communication error between the controller and the operation panel (Smart Operation Panel). This happens when the controller fails to receive a response from the panel within a specified timeframe after startup. Quick Troubleshooting Steps
The error on Ricoh multifunction printers (MFPs) is a communication error that typically occurs between the controller board and the operation panel or other internal components during startup . This specific sub-code ( -10negative 10
Corrupted print jobs stuck in the network queue or faulty external USB devices can occasionally lock up the controller during startup. Step-by-Step Troubleshooting Checklist
For further assistance or to schedule a technician, visit the Ricoh Global Support site . sc673-10 ricoh error
Plug it back in and restart to see if the communication link re-establishes.
The internal USB or flexible flat cables (FFC) connecting the controller board to the operation panel are loose or damaged.
Comprehensive Troubleshooting Guide for the Ricoh SC673-10 Error Code The error code typically indicates a communication error
Download the latest firmware bundle for your specific Ricoh model from the official developer portal.
Locate the access panel near the back or side where the operation panel arm connects to the chassis.
Locate the communication cables (typically a grey USB cable or a wide ribbon cable) linking the panel to the main body. This specific sub-code ( -10negative 10 Corrupted print
Outdated or corrupted system firmware failing to initialize the boot sequence properly.
(SOP). This "Flair communication error" typically occurs when the controller board does not receive a response from the operation panel during startup or operation. Common Causes Disabled Panel Settings:
Unplug the harness connectors from both ends (the controller board side and the back of the operation panel). Inspect the pins for bends, corrosion, or breakage.
Note: This step requires entry into the Ricoh Service Program (SP) Mode and should be handled carefully.
While not listed in all manuals, some technicians have found that a failing HDD can cause communication timeouts that trigger SC673-10.