Screw the tactical flexible whip antenna firmly onto the designated whip connector. Ensure the base insulator sits flush to prevent RF leakage.
: The radio supports USB and LSB (the standard for long-range voice communication) and AM (compatible with older systems). The 20-watt maximum output power provides an excellent balance between long-distance reach and battery conservation, with selectable lower settings for power saving.
[ FRONT PANEL INTERFACE & CONTROLS ] │ ┌───────────────────────────────┴───────────────────────────────┐ ▼ ▼ ▼ [1. POWER SOURCE] [2. ANTENNA SYSTEM] [3. PERIPHERALS] • CR2032 Check • Whip (Short Range) • Handset H-250 • Battery Pack Lock • Dipole (Long Range) • Mini Data Terminal 1. Power Source Preparation
Turn the main ON/OFF switch clockwise to power on the system. Keep turning to adjust the initial background audio output volume. radio set hx prc 6020 technical data install
Up to 4800 bit/s; supports FLASH messages up to 1000 characters
This guide covers the general installation and deployment of the system in its standard configurations.
Carefully remove the radio, battery, antenna(s), hand microphone, and accessories from their cases. Visually inspect all equipment for any physical damage. Screw the tactical flexible whip antenna firmly onto
: Components include a brass power input pin, steel battery box locks, and aluminum hook fittings for body covers. Operational Features HX PRC 6020
-30°C to +55°C (standard); some batteries rated -40°C to +60°C Installation and Hardware Components
The system is characterized by its wide frequency coverage and advanced electronic counter-countermeasure (ECCM) capabilities. Elbit Systems UK Ltd Technical Specification Frequency Range 1.5000 to 29.99999 MHz 2,850,000 channels (10 Hz spacing) Pre-set Channels 100 programmable channels Output Power Selectable 5W, 10W, or 20W Modulation USB, LSB, and AM Up to 4800 bit/sec Receiver Sensitivity -110 dBm (10 dB SINAD) Battery Type 12V, 15Ah Lithium Sulphur dioxide (LiSO2) Operational Modes Frequency Management: The 20-watt maximum output power provides an excellent
: Shifts the system to clear, unencrypted analog/digital traffic instantly.
Specific ports for whip/rod antennas and dipole/wire antennas are located on the top or front panel.
The front panel layout and physical construction of the radio feature a rugged aluminum body cover secured by custom captive socket-head screws and tactical brass power inputs. The interface consists of:
Screw the antenna base into the antenna port (BNC connector) on the top of the radio.
Usability & Maintenance