Ldc101 Usb To Civ Driver Updated !!exclusive!! -

Port Conflicts: If the COM port number is too high (above COM10), some older software may not see it. You can change this in Device Manager under Port Settings > Advanced.

To fix this, you must bypass the updated driver and manually install an older, verified version that still supports these chips. Step-by-Step Fix for the LDC101 USB to CI-V Driver

Extract the downloaded .zip archive to a folder on your desktop. ldc101 usb to civ driver updated

To get around the restriction, you need an older driver version (typically from 2007 to 2014) that does not include the clone-blocking algorithm.

Some counterfeit LDC101 cables use knock-off Prolific chips that are intentionally broken by official drivers. For those, the "updated" driver may require a specific older version (e.g., v3.3.2.107). We cover that fix in Section 5. Port Conflicts: If the COM port number is

Uncheck "Show compatible hardware" if necessary, but ideally, you will see a list of installed versions. Select the older version (e.g., version 3.2.0.0 for Prolific) and click .

Plug the LDC101 cable back into a different USB port if possible. Open and check Ports (COM & LPT) . Step-by-Step Fix for the LDC101 USB to CI-V

If you are still experiencing issues, it may be helpful to check if your interface is using a different chipset (like FTDI) or try a different USB cable.