RCA inputs for connecting source devices like KTV players, VOD systems, laptops, or DVD players.
. The RMA 220 is not just a standard amplifier; it is a specialized Karaoke Amplifier
• Lower the output volume on your source player.• Verify speakers are rated between 4 to 8 ohms.• Lower the amplifier volume until the PEAK light stops flashing. Routine Maintenance and Care jbl rma 220 user manual
What are you experiencing? (distorted sound, low volume, humming noise?)
Elias threw the power switch. The LED died. The room fell into a deeper silence than he had ever known. RCA inputs for connecting source devices like KTV
| Symptom | Possible Cause(s) | Suggested Remedy | | :--- | :--- | :--- | | | Power cord not properly connected; Power outlet is faulty. | Check the power cord connection. Test the power outlet with another device. | | No sound from speakers | Incorrect input source selected; Speaker wires are loose or disconnected; MASTER VOLUME is turned down. | Ensure the correct input source is active. Check and secure all speaker wire connections. Gradually turn up the MASTER VOLUME. | | No sound from microphone | Microphone not plugged in correctly; MIC VOLUME is turned down. | Ensure the microphone is firmly connected. Turn up the associated MIC VOLUME knob. Check if a different microphone works. | | Loud, high-pitched squeal (Feedback) | Microphone too close to the speaker; Microphone volume too high; EQ settings boosting problematic frequencies. | Move the microphone away from the speakers. Reduce the MIC VOLUME. Adjust the microphone's 3-band EQ, starting by reducing the high frequencies. | | Distorted or "muffled" sound | Speaker impedance below 4 ohms; Overdriving the amplifier; Incompatible speaker cable gauge; EQ settings are too extreme. | Ensure speakers are rated for 4-8 ohms. Lower the MASTER VOLUME. Use thick enough speaker wire. Reset EQ settings to flat and adjust slowly. | | Music is out of key for my voice | Song key doesn't match vocal range. | Use the Music Key Control buttons to raise or lower the pitch of the music only. | | One side has no sound | Balance control is turned to one side; Speaker wire on the silent channel is faulty; Internal channel failure. | Set the BALANCE control to the center position. Swap left and right speaker wires to test. If the problem follows the speaker, replace the wire. If it stays on the same channel, consult a technician. |
Follow this sequence to achieve an optimal acoustic blend between background music and vocals. Initial Power-Up Sequence Routine Maintenance and Care What are you experiencing
is actually the "secret recipe" for one of the most iconic pieces of karaoke history
View by Product. View by Download Type. Software. Firmware. Accessories. Application Guides. BIM Objects. Brochures. CAD Drawings. JBL Professional JBL On Stage IIIP UG.indd
