If the executable installer fails, force the installation via Windows Device Manager: Plug the adapter into the PC. Right-click the Start Menu and select .
Access your main internet router's settings gateway and change the 2.4 GHz broadcast channel from "Auto" to a fixed, non-overlapping channel such as 1, 6, or 11 . Additionally, configure the channel width setting to 20MHz instead of 40MHz to establish a narrower, more stable frequency lock. Maximizing Performance Post-Installation
Once your driver is installed successfully, apply these configuration tweaks to get the best performance out of your 150Mbps hardware:
Most modern Windows operating systems feature plug-and-play capabilities that automatically detect the CF-WU713N. However, to unlock maximum speed and stability, manual driver installation is highly recommended. Method A: Using the Executable Installer (Recommended) Download the zip file containing the Windows driver. Extract the contents to a folder on your desktop. Locate the Setup.exe file inside the extracted folder. Right-click Setup.exe and select . comfast cf-wu713n driver
Restart your Mac, and use the installed Wireless Network Utility to connect to local networks, as native macOS Wi-Fi menus do not always integrate with third-party USB dongles. For Linux (Ubuntu, Debian, Mint)
If the executable installer fails, you can force Windows to recognize the driver files manually: Plug the CF-WU713N into your PC. Right-click the Start Menu and select .
Typically utilizes the MediaTek/Ralink RT5370 or Realtek RTL8188 series (varies by hardware revision). 📥 Where to Download the Drivers 1. The Official Comfast Website If the executable installer fails, force the installation
Look for a device with a yellow exclamation mark, usually listed under as "802.11n WLAN" or "Realtek". Right-click the device and select Update driver . Choose Browse my computer for drivers .
Open Device Manager , expand Network Adapters , and right-click your Comfast device. Select Properties , navigate to the Power Management tab, and uncheck the box that says "Allow the computer to turn off this device to save power." Problem 3: Driver Fails to Install on Windows 11
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Frequency Range: 2.4 GHz – 2.4835 GHz Data Rate: Up to 150 Mbps Additionally, configure the channel width setting to 20MHz
To ensure you get the absolute best performance out of your Comfast CF-WU713N nano adapter, tweak these advanced driver properties:
： CF-WU713N 的驱动主要为 Win7 至 Win10 系统设计。Realtek 8812BU（该型号常用芯片）的官方不再为 Win11 提供专门的驱动程序。虽然可以尝试兼容模式安装 Win10 的驱动，但若你的 Windows 11 版本较新（如 22H2 及更高版本），务必确认驱动包包含 ARM64 兼容标识，否则可能引发系统不稳定甚至蓝屏风险。
Uncheck . Click OK to save changes. Slow Download and Upload Speeds
Locate the Setup.exe or Install.exe file within the extracted folder.
sudo apt update sudo apt install dkms git build-essential git clone https://github.com/aircrack-ng/rtl8812au.git cd rtl8812au sudo make dkms_install sudo modprobe 88XXau