Canon Service Mode Tool Version 1050 【95% GENUINE】

Clears "Ink Pad Full" error codes (such as error 5B00 or 1700) after physical pads are replaced.

The you see The operating system your computer runs on Share public link

+------------------------+---------------------------------------+---------------------------------------+ | Error Code / Symptom | Root Cause | Solution | +------------------------+---------------------------------------+---------------------------------------+ | Error Code 006 | Printer not in Service Mode or | Re-enter Service Mode using correct | | | wrong tool version utilized | button sequence; run as Admin. | +------------------------+---------------------------------------+---------------------------------------+ | Error Code 005 | Software does not support model | Upgrade to a newer Service Tool | | | generation connected to PC | version (e.g., V4905 or V5103). | +------------------------+---------------------------------------+---------------------------------------+ | Program Freezes / | Faulty USB communication or driver | Change USB port (prefer USB 2.0); | | "Not Responding" | conflict hanging execution | disconnect other USB peripherals. | +------------------------+---------------------------------------+---------------------------------------+ | Error Code 002 | Function requested is physically | Hardware failure exists; replace | | | blocked by a hardware error | cartridge, carriage, or logic board. | +------------------------+---------------------------------------+---------------------------------------+ The "Locked Mainboard" Condition canon service mode tool version 1050

Resetting the ink counter without physically cleaning or replacing the ink pads can lead to ink leaking out of the bottom of the printer. Permanent Lockout:

: The tool provides comprehensive diagnostic capabilities to identify and troubleshoot hardware and software issues within Canon printers. This includes checking the status of various printer components, error code retrieval, and performing system checks. Clears "Ink Pad Full" error codes (such as

Clears the EEPROM counter that tracks ink usage during cleaning cycles. This allows the printer to function again after a "Waste Ink Absorber Full" error 0.5.3 .

Turn off the printer using its power button, wait 10 seconds, and turn it back on normally. Troubleshooting Common Errors wait 10 seconds

While it is widely cited in legacy repair guides, modern reviews and expert communities often consider it outdated compared to newer versions like or V5105 . Key Features

If you try to use v1050 on a newer printer, you will likely see Error Code 002 , which means the tool does not support your specific printer model .