Blackweb Mechanical Gaming Keyboard Manual Hot! File

: Press Fn + Windows Key to disable the Windows button during gaming (prevents accidental minimizing).

To set up your keyboard, simply connect it to your computer using the provided USB cable. The keyboard is plug-and-play, so you can start using it right away. However, we recommend taking a few minutes to read through the manual to familiarize yourself with the keyboard's features and settings.

Most Blackweb mechanical keyboards use FN + [Key] combinations. Below is the standard layout:

Carefully remove the keyboard and the detachable wrist rest (if included). blackweb mechanical gaming keyboard manual

| Model Name (on box) | Switch | Backlight | Key Rollover | |---------------------|--------|-----------|--------------| | BWG-1110 | Blue | 6-color static | 19-key | | BWG-2201 | Blue | RGB breathing | Full NKRO | | BWG-TKLv2 | Red linear | Rainbow wave | 6-key + anti-ghosting |

Press Fn + Delete while in a dynamic mode to lock or switch the active color palette. 🎮 Gaming Modes and Macro Recording

Yes, the keyboard will function as a standard USB keyboard on macOS. However, the macro programming software is Windows-only, and some Fn key combinations may behave differently. : Press Fn + Windows Key to disable

Cycle through the 12 primary preset LED lighting modes (e.g., Wave, Breathing, Ripple, Static, Reactive).

⚠️ Do not use USB hubs with passive power – connect directly for full RGB and anti-ghosting performance.

The keyboard features pre-programmed lighting layouts that illuminate only the essential keys used in specific gaming genres. FPS Mode (Illuminates WASD, ESC, and Arrow keys) FN + 2: Crossfire / Shooter Mode FN + 3: COD / Battle Royale Mode FN + 4: League of Legends / RTS Mode FN + 5: Racing Mode 4. Custom Backlight Programming However, we recommend taking a few minutes to

Safely remove the keyboard and the included keycap puller from the packaging.

The Blackweb Mechanical Gaming Keyboard is a "plug-and-play" device, meaning it should work immediately upon connection without requiring additional drivers for basic functionality.

If the lighting profiles become corrupted or unresponsive, hold down Fn + Esc simultaneously for 3 to 5 seconds. The backlighting will flash, indicating that the hardware firmware has reverted to factory defaults. Technical Specifications Specification Switch Type Mechanical Blue Switches (Tactile & Clicky) Interface Wired USB 2.0 / USB 3.0 Key Rollover Full N-Key Rollover (Anti-Ghosting) Backlighting Multi-zone Customizable RGB LED Compatibility